When you find the perfect place to rent in your chosen neighborhood that's also within your budget, you probably aren't wondering whether the square footage in the listing is accurate. However, that calculation is one of the most important factors when evaluating a property's value. After all, if your rent is based on 1,200 square feet, you have the right to get what you're paying for, right?
The American National Standards Institute (ANSI) provides guidelines for measuring and calculating residential square footage. Many builders and real estate agents follow these, but because compliance with these standards is voluntary, what's advertised isn't always accurate.
Also, square footage guidelines can vary depending on where you live: Some states disclose this information, and others don't. Here's how to measure the square footage of a house or apartment.
Gather a few supplies for the task
Calculating square footage is pretty easy. First, you will need a couple of things on hand that will help you measure the space:
- A large piece of paper
- A pencil
- A calculator
- A laser measuring tool or a measuring tape
Sketch out your space
If you're planning to rent a one-story condo that's rectangular, that's an easy calculation: Measure the width and length, in feet, and then multiply those two numbers.
Since most properties aren't perfectly shaped, however, you'll probably need to complete a few steps to get the full picture. Begin by drawing a diagram of all rooms and hallways, and be sure to label each one so you can keep track of the measurements.
If you're looking at a new rental unit, ask the landlord if you can see the builder plans of your apartment's floor plan because the square footage is usually already calculated.
Measure each room
Going room by room, measure the length and width, rounding off to the nearest half-foot.
Real estate agents often use an electronic laser distance measuring tool. If you have one, place it on a wall, aiming it directly at the wall opposite it. You will then see the square footage displayed on the device's screen. A tape measure works well if you don't have a laser tool.
Multiply those numbers, rounding off to the nearest square foot, then write down your measurement on your sketch. For instance, if the kitchen is 10 feet by 16 feet, the total square footage is 160 square feet.
If a room has an alcove, such as a living room with an area for a home office, measure that space separately and add it to the overall square footage of the room. The same is true for rooms with closets: measure each one by multiplying the length by width.
Leave out these spaces, because they don't count
Generally, ANSI standards suggest counting only finished spaces — any lived-in area that has walls, a ceiling height of seven feet or more and a floor. So, if you can't walk on or live in a certain spot, that is a non-usable space, not part of the gross living area. For example, if you're renting a house, patios, porches and garages — don't count towards your unit's square footage. If the garage is converted into a living space though, it will count in the overall square footage.
Pool houses, storage areas or guest houses are also excluded, and in some states, so basements.
Add up all your measurements
Once you've measured each space, you can add up all your numbers to find out the rental unit's total square footage.
How to calculate square footage if you can't visit the unit
If you're apartment hunting from another location and can't physically measure the rooms, there are other ways to find out a house's total square footage.
You can look up the city or county's property records. Some towns make detailed property records — including square footage — available online. If not, and you're working with a real estate agent, he or she can pull this information for you.
Or, you can hire an appraiser to measure the property for you.
Square footage is an important factor when renting
Measuring an apartment or house's square footage helps determine its value. While knowing this information can help you decide if a property is worth the rent being charged, remember that calculating square footage is subjective.
Some landlords and real estate agents may use ANSI guidelines and some not. Certain states require square footage in every listing description while others do not. That's why it's up to you to figure it out yourself or hire a professional to do it for you.